Western Robotics Tail Servo Step Down Voltage with LED

Specifications: Height - 4mm Width - 8mm Length - 12mm Weight - 4 grams   Tail Servo Step-Down Voltage is ideally designed to step-down a voltage source of 6 volts that is outputted from any external BEC (battery eliminator circuit)  down to 5.2 volts.  This allows an external 6 volt BEC to be used with Futaba servo models 9241. 9251. 9253. 9254. 9255. 9256 and other digital servos that are not capable of handling 6 volts.  The Tail Servo Step-Down Voltage is equipped with male/female servo plugs and is ideally used in series with the RC modelÕs gyro and rudder servo to prevent any harmful damage overloading to your servo.  The Tail Servo Step-Down Voltage can also be used with any other applications that require a step down power voltage of  approximately 0.8 volts.   Ultra compact step-down voltage regulator cable to reduce 6V source to a safe 5.2V to the rudder servo High Power component to withstand current of up to 5 Amps continuous, 10 Amps peak at 50V Prevents harmful damage and overloading to the digital rudder / tail servo Easy installation LED Indicator