1. Home
  2. Electronics
  3. Motors
  4. Scorpion HK-2221-6 V2 Brushless Motor
Scorpion HK-2221-6 V2 Brushless Motor
Scorpion HK-2221-6 V2 Brushless Motor

Scorpion HK-2221-6 V2 Brushless Motor

Part Number: HK-2221-6-V2
Write a Review
Your Price: $80.00
Scorpion HK-2221-6 V2 Brushless Motor
Availability: In Stock.
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F). All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 3.17mm shaft (1/8 inch). Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly. Specifications Stator Diameter 22.0 mm (0.87 in) Stator Thickness 21.0 mm (0.83 in) No. of Stator Arms 9 Magnet Poles 6 Motor Wind 6 Turn Delta Motor Wire 20-Strand 0.21mm Motor Kv 4400 RPM / Volt No-Load Current (Io) 2.89 Amps @ 10 volts Motor Resistance (Rm) 0.016 Ohms Max Continuous Current 52 Amps Max Continuous Power 525 Watts Weight 81 Grams (2.86 oz) Outside Diameter 27.9 mm (1.098 in) Shaft Diameter 3.17 mm (0.125 in) Body Length 38.3 mm (1.508 in) Overall Shaft Length 58.7 mm (2.311 in) Max Lipo Cell 3s Motor Timing 5deg Drive Frequency 8kHz Included in the Box 1 x Scorpion HKII-2221-6 Motor3 x Female Connectors3 x Heat Shrink4 x M3 Screws

Reward Points

240 points will be rewarded to you when you buy this item.

Related Items

Scorpion HK-3226-1400 Brushless Motor
In Stock. Free Shipping.
$130.00
Xnova XTS 4530 525KV 4+5YY (1.5mm thick wire) 38mm
Out of Stock. Free Shipping.
$380.00
XNova XTS 4535 460kv 10P 4+5YY
Out of Stock. Free Shipping.
$475.00
Xnova 4020 1200KV 2Y 25mm Shaft 5mm C for Logo 480
Out of Stock. Free Shipping.
$180.00
Xnova 4025 830KV 2Y
Out of Stock. Free Shipping.
$210.00
Kontronik Pyro 650-53L 530kv Long Shaft Brushless Motor
Custom built one week leadtime Free Shipping.
$320.00
Kontronik Pyro 750-50L 500kv Long Shaft Brushless Motor
Custom built one week leadtime Free Shipping.
$450.00