MKS DS450 Micro Cyclic Servo
Great cyclic servo for the Oxy 2
| Dead Band | 0.002ms (Default) |
| Control System | +Pulse Width Control |
| Working Frequence | 1500µs / 333hz data: 850µs~2150µs |
| (RX) Required Pulse | 3.0 ~ 5.0 Volt Peak to Peak Square Wave |
| Operating Voltage | 4.8 ~ 5.0 V DC Volts |
| Operating Temperature Range | -10 to + 60 Degree C |
| Operating Speed (4.8V) | 0.120 sec/60° degrees at no load |
| Operating Speed (5V) | 0.115 sec/60° degrees at no load |
| Stall Torque (4.8V) | 3.10 kg.cm (43.0 oz/in) |
| Stall Torque (5V) | 3.22 kg.cm (44.7 oz/in) |
| Motor Type | Coreless Motor |
| Potentiometer Drive | Direct Drive |
| Driver Type | FET |
| Bearing Type | Dual Ball Bearings |
| Gear Type | Chrome-Titanium alloy gear |
| Programmable | YES |
| Connector Wire Length | 15.0 cm (5.9 in) |
| Dimensions | 22.5X10X23.5 mm (0.89x 0.39x 0.93 in) |
| Weight | 9.5 g (0.335 oz) |
|
